Upgrade Tuning Parts for Dillon contains:
for live primers will prevent live primers to drop from your machine
Dillon 650 live primer upgrade. Stop ramp for live primers. Fits reloading machine dillon XL650. Just put it on your existing live primer ramp. 3D printed from on high-end printer from high quality ABS plastics.
1x Primer follower rod holder hook
Compatible with the current model Dillon XL650 RL550 and Super 1050 (probably a few others too that have the 9/16-18 thread). Ample room in the hook area for those with weighted follower rods too. Installation: No tools required. Remove the primer alarm and the primer tube top nut. Thread this holder onto the primer tube with the hook area up. Thread it all the way on then back a little bit as needed to position it to the side as pictured. Reinstall the primer tube top nut. Due to variances in machines, the top nut may or may not be tight for desired alignment. Reinstall the primer alarm.
1x Hex key holder for original Dillon hex keys and some accessories.
Simply attach this hex hey holder to your casefeeder rod and keep your hex keys oragnised. There is also some space for pins.
The case bin stopper fits into the front of the Cartridge Collection Bin used on Dillon, RCBS and LEE presses, and keeps rounds from rolling out and onto the floor when the bin gets near full. With the case bin stopper in place, you can use 100% of the cartridge collection bin's capacity! The bins can still be stacked with the case bin stopper in place. Made from durable 1,5mm thick aluminum and with nice white window for your marking.
1x Precision Powder Baffle for Dillon Powder Measure with visual alarm.
Powder Baffle is a must have reloading accessory that dramatically increases powder load consistency and accuracy! When reloading your own ammunition it is common to produce 500 to 1,000 rounds per hour. At this rate your powder reservoir empties pretty fast. The weight of powder in the tube affects how full of a charge your bullets receive. A baffle ensures consistent weight on the powder at the bottom of the reservoir, giving you consistent loads. This design eliminates direct weight from the powder in the powder tube reservoir to the charge bar allowing the most consistent and accurate flows. Whether the powder reservoir tube is full, half way or almost empty your averageload should be consistent. Powder Baffle is made from stainless steel. Fits on Dillon Auto Powder Measure. It only takes a few seconds to drop it down into the bottom of the Dillon powder hopper. The powder hopper is not modified and your Dillon Warranty will not be effected.